584,862 active members*
5,386 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Sharp CNC > SV2412S Tool Carousel is Posessed
Results 1 to 3 of 3
  1. #1
    Join Date
    Sep 2015
    Posts
    3

    SV2412S Tool Carousel is Posessed

    We have a Sharp SV2412S with almost no hours on it. As soon as you flip the breaker on the back of the machine the tool carousel starts turning and doesn't stop. Doesn't matter if the controller is off and both e-stops are engaged, it keeps rotating until you shut power off to the machine. There aren't any chips up in the carousel where the magnetic sensor is. What could be the cause of this?

  2. #2
    Join Date
    Nov 2014
    Posts
    34

    Re: SV2412S Tool Carousel is Posessed

    check wire that connects optical switch

  3. #3
    Join Date
    Apr 2014
    Posts
    6

    Re: SV2412S Tool Carousel is Posessed

    I personally just started using a Sharp machine. Honestly the biggest issue i have had is with the tool carousel. Sometimes when i go to do a tool change in MDI it brings up the wrong tool location and crashes 2 holders into each other.
    Maybe a re-occurring issue with these machines. Has happened twice to me. Certainly not an operator error.

Similar Threads

  1. Tool carousel pot
    By bigbobr in forum Fanuc
    Replies: 4
    Last Post: 01-29-2016, 10:48 AM
  2. tool carousel locked up
    By TXMILLGUY in forum Fadal
    Replies: 1
    Last Post: 01-04-2012, 07:09 AM
  3. Biesse tool carousel
    By Nathan.fisher in forum CNC Tooling
    Replies: 0
    Last Post: 03-11-2011, 07:32 AM
  4. Tool Carousel Operation
    By rbcmetalwork in forum Sharp CNC
    Replies: 4
    Last Post: 12-30-2010, 09:16 PM
  5. tool carousel alignment
    By rubino2112 in forum DNC Problems and Solutions
    Replies: 0
    Last Post: 12-27-2006, 07:26 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •