I am looking at one of the many (similar, I assume) ballscrew kits on Ebay...I realize when they list the length, they are talking overall...I cannot find any dimensions of the motor mount end, where the threads are, and the coupler shaft go...
That is, an 800 mm screw, how long are the actual screw threads, and how long is each machined end? Trying to guage how long I need for my 750mm wide X axis
Thanks
Thread: Ball screw dimensions
Results 1 to 3 of 3
-
04-07-2016, 01:38 AM #1
Registered
- Join Date
- Dec 2013
- Posts
- 29
Ball screw dimensions
-
04-07-2016, 01:55 AM #2
Registered
- Join Date
- Dec 2013
- Posts
- 29
Re: Ball screw dimensions
I found this on Ali Express..would this be typical dimensions for this size or is it more "who-knows"?
-
04-07-2016, 02:08 AM #3
Registered
- Join Date
- Apr 2003
- Posts
- 302
Re: Ball screw dimensions
Most of the chinese ball screw kits are listed and have drawings at https://www.automationtechnologiesinc.com/
Reply With QuoteSimilar Threads
-
Ball nut arbor size for 1605 ball screw
By kdoney in forum MetalWork DiscussionReplies: 1Last Post: 04-08-2020, 07:45 AM -
Z axis to ball screw or not to ball screw
By brian257 in forum Bridgeport / Hardinge MillsReplies: 7Last Post: 03-28-2012, 09:39 PM -
what bearing fit with acme screw 1/2 -10(for cheap ball screw)
By apex in forum Linear and Rotary MotionReplies: 4Last Post: 07-27-2007, 05:15 PM -
roller screw versus ball screw.
By Paraprop in forum Linear and Rotary MotionReplies: 2Last Post: 04-15-2007, 10:21 AM -
New technology.... old debate.....ball screw vs lead screw
By trubleshtr in forum Linear and Rotary MotionReplies: 1Last Post: 08-16-2005, 02:42 AM
Tags for this Thread
Posting Permissions
