584,829 active members*
4,842 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Fanuc > Fanuc 6M write-enable toggle switch
Results 1 to 3 of 3
  1. #1
    Join Date
    Apr 2016
    Posts
    5

    Fanuc 6M write-enable toggle switch

    Hi guys,

    I'm a total newbie and I have been tasked with getting the PC connected to the FANUC 6M controller. The punch code is set to 0, and I need to set it to 1.

    My problem being is I can't locate the write-enable toggle switch on the main motherboard.

    Is anyone able to describe to me where it is, or maybe send a picture of it?

    Many thanks,

    Mike Evans!

  2. #2
    Join Date
    Apr 2009
    Posts
    1379

    Re: Fanuc 6M write-enable toggle switch

    bottom left on the main/master board.

  3. #3
    Join Date
    Apr 2016
    Posts
    5

    Re: Fanuc 6M write-enable toggle switch

    Many thanks. managed to change the Punch Code.

    No effect, back to the old drawing board!

Similar Threads

  1. Reversing an electric drill using a toggle switch
    By kazuo in forum CNC Machine Related Electronics
    Replies: 1
    Last Post: 12-29-2009, 11:48 PM
  2. Q: Mach3 Wiring / Toggle Switch
    By Deviant in forum Gecko Drives
    Replies: 3
    Last Post: 02-11-2009, 04:21 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •