[GigaWatt]

I received the last of the parts for my Pro 4824 ten days ago and finally found time last evening to get started. After 3 hours of halfway watching TV, fixing popcorn and taking the dog out; I completed the gantry risers & gantry carriage. Since I'm in the later stages of remodeling my basement, updates will be slow coming for awhile.

I have 1 question. Did any of you use Loctite on the fasteners that won't require adjustment?

[jay_bird]

I didn't use any locktite except for the setscrews for the pulleys. If you do, I'd recommend the blue locktite, The red is way to strong if you need to disassemble later.

[Kosh]

I have 1 question. Did any of you use Loctite on the fasteners that won't require adjustment?

Use BLUE loc-tite on anything mounted in a vertical slot (gantry riser bolts). I didn't, and had one of the bolts vibrate out. Now the nut
has slid down and I have no way to get it back into position unless I dismantle the gantry.

[SixOfOne]

Did any of you use Loctite on the fasteners that won't require adjustment?

Yup, Blue stuff on it all.