Hi all.
I have a 30w fiber laser (from Laserstar). I am engraving steel and aluminum. The machine was running fine yesterday, then I stepped away and when I came back it was as if suddenly the power was turned almost all the way down. The machine is still tracing the art, but with almost no power.
- I've experimented with changing various power settings, no luck.
- I've put the laser on continuous cut mode and played with height from material, and it is not behaving better at any focal length.
- I've checked the mirrors and lenses and all are in good shape.
- All cables are plugged in and undamaged
Anyone have any ideas on what I can try to check next, or what my problem might be?
Thanks!
- Jay