[WV_Kokamo_Joe]

I have downloaded the gcode for the acrylic parts for the limit switches and would like to cut them out on my 40W Co2 laser printer. Can I just upload these to my CorelDraw program or do they need converted? If this is not possible, what are the recommended speed settings for the KRMX01? I am worried about burning or breaking the acrylic on the cnc router, that's why I wanted to use my laser machine.

Any help is appreciated

[msimpson99]

Where did you get the Gcode for the limit switches?

[WV_Kokamo_Joe]

Where did you get the Gcode for the limit switches?

I was mistaken in that statement. I thought the information you directed me to a while back was the gcode. My apologies. Sorry for the delay in response. I have been really busy.

On a related note though, if you can direct me to the original files I need to make the mounts, as I have lost the information and am I able to use the dimensions in vcarve pro or somehow import them? and then create the cut paths and what post processor do I use for the KRMx01? I have only used the precompiled files for the Dragon Cable guides you created and have not created anything yet in vcarve myself to cut out on the KRMx01.

Thanks,
Joe

[msimpson99]

The limit switches gcode is part of the "Upgrading the KRMx01" workbook available on amazon. If you purchased that book, the links are in the book.