Hi all,

I've just picked up a used Extron E320 with the Mirl Milling 2000 control on it. I'm trying to set up a way to transfer files to it. It has a network card plus RS232 port and I've fitted a floppy to USB emulator which is showing up the USB stick (formatted as a 1.44mb floppy) in DOS but won't do the same through the control program. I can't get it to communicate through RS232 with any DNC program, I've tried a regular and null modem cable with the same results. If anyone has RS232 settings they know work and would share I'd appreciate it.

Cheers,
Greg