[pruiz92]

Hi all!, I want to use the waveform programming in surfcam 2016, but don't find this option in roughing o pocket roughing or contour.

Does any one has idea how to do it??

[bnagel]

Do you know the level of software you have? Waveform is included in Standard milling or higher. It is not in Essential milling.

[Billetgrip]

Looks like it's time to make a subforum to separate Surfcam and Traditional Surfcam.

Tradition Surfcam has a waveform style pocketing routine called Pocket Rough. It works great on pockets that are round. Any other shape it loses its advantage because it uses your plunge feedrate as the feed between rate.

[sinderal]

Looks like it's time to make a subforum to separate Surfcam and Traditional Surfcam.

Tradition Surfcam has a waveform style pocketing routine called Pocket Rough. It works great on pockets that are round. Any other shape it loses its advantage because it uses your plunge feedrate as the feed between rate.

SURFCAM Traditional 2017R1
The WaveForm 3 Axis ... Look like better than TrueMill 2 or 3 Axis for the Outside Tool Path

https://1drv.ms/v/s!ArRUdqz-brnsga1M2k6aSczqD5KiZw