584,830 active members*
5,551 visitors online*
Register for free
Login
Page 2 of 2 12
Results 21 to 25 of 25
  1. #21
    Join Date
    Feb 2018
    Posts
    5
    Dear Viorel

    I bought a maho mh700s with philips 432 from 1992(version of soft ware is 6701.703/03 ) , I want to use it in DNC mode , I have not any idea .
    please advice me how can I do it ?

    sorry for bad english

    many thanks

  2. #22
    Join Date
    Feb 2020
    Posts
    4
    Olá preciso dos parâmetros maho 600C versão 6097/405.

    Quem poder me enviar agradeço.

  3. #23
    Join Date
    Feb 2020
    Posts
    4
    Olá preciso dos parâmetros maho 600C versão 6097/405.

    Quem poder me enviar agradeço.

  4. #24
    Join Date
    Mar 2022
    Posts
    1

    Re: Maho Philips 432 answers

    Hello ,
    I work On a Decel Maho 800 e2 machine with Maho 432 control, the interesting thing is that it works with the G18 programming plane, but the Z axis is Y and the Y axis is Z, which is very confusing.
    I see that you asked a colleague if he changed the axis of the machine parameters, which makes me think that the same thing was done for me. If you can help me change this thing I will be very grateful.
    Greetings!

  5. #25
    Join Date
    Feb 2006
    Posts
    12

    Re: Maho Philips 432 answers

    Old maho's are like this. It's because the horizontal milling spindle is seen as the main spindle, when viewing from this spindle the Y and Z axes are correct.
    The vertical spindle can be removed and is therefore seen as the secondary spindle, which is why the axes seem inverted when using this spindle.
    This cannot be changed in the control. You can switch from G18 to G17, but that just tells it to add tool lengths to the Z axis instead of the Y axis.

Page 2 of 2 12

Similar Threads

  1. MAHO 900C with Philips CNC 432
    By ua_gs in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 03-24-2016, 09:51 AM
  2. PHILIPS 432 (MAHO MC50)
    By abbas in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 2
    Last Post: 10-24-2009, 10:17 AM
  3. MAHO-PHILIPS 432 M60 and G23 problem
    By micktat in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 4
    Last Post: 03-03-2009, 11:10 PM
  4. Maho 650 - CNC 532 Philips
    By nylas in forum Deckel, Maho, Aciera, Abene Mills
    Replies: 0
    Last Post: 01-13-2007, 07:41 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •