584,850 active members*
4,461 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Hyundai Kia > Need Help Please !! Hyundai-Kia VX500 Spindle V-Belt
Results 1 to 3 of 3
  1. #1
    Join Date
    May 2016
    Posts
    2

    Need Help Please !! Hyundai-Kia VX500 Spindle V-Belt

    Can anyone please help us. We have a Hyundai-Kia VX 500 machining centre that has snapped the V-Belt between the drive motor and the spindle. Can anyone offer any diagrams or manuals on how to change the V-Belt or does anyone know of a person we could contact to fix it for us. We are located in Wollongong, NSW Australia. Thanks in advance .. Dale

  2. #2
    Join Date
    Apr 2009
    Posts
    1262

    Re: Need Help Please !! Hyundai-Kia VX500 Spindle V-Belt

    You should have a dealer in Brisbane Australia - check the website below.

    https://machine.hyundai-wia.com/usa/...DO=&S_SEARCH=Y

    Typically to replace the belts, you will loosen the spindle motor, slip off the old belts. You may need to disconnect spindle thru coolant and clamp cylinder hoses, etc. in order to get them completely off. Then re-install belts and re-connect what was disconnected. It's may not be a fun job, but you will save a lot of dough if you tackle it yourself. The belts will be fairly snug with about 7mm deflection when pushing hard with your fingers. If they squeak when starting and stopping the spindle, they are still too loose.

    Best regards,
    Experience is what you get just after you needed it.

  3. #3
    Join Date
    Mar 2023
    Posts
    4

    Re: Need Help Please !! Hyundai-Kia VX500 Spindle V-Belt

    Quote Originally Posted by OkumaWiz View Post
    You should have a dealer in Brisbane Australia - check the website below.

    https://machine.hyundai-wia.com/usa/...DO=&S_SEARCH=Ypaper io 2

    Typically to replace the belts, you will loosen the spindle motor, slip off the old belts. You may need to disconnect spindle thru coolant and clamp cylinder hoses, etc. in order to get them completely off. Then re-install belts and re-connect what was disconnected. It's may not be a fun job, but you will save a lot of dough if you tackle it yourself. The belts will be fairly snug with about 7mm deflection when pushing hard with your fingers. If they squeak when starting and stopping the spindle, they are still too loose.

    Best regards,
    The V-Belt on our Hyundai-Kia VX 500 machining center has broken between the drive motor and the spindle. Please share any instructions, manuals, or contacts you may have for someone who can change the V-Belt for us.

Similar Threads

  1. RF-30 Spindle belt choices
    By martin_05 in forum Benchtop Machines
    Replies: 0
    Last Post: 03-17-2015, 04:57 PM
  2. spindle belt don't last
    By samu in forum Bridgeport / Hardinge Mills
    Replies: 12
    Last Post: 06-03-2013, 07:29 PM
  3. Hyundai HiT-18S Spindle Sleeve
    By CaseyCAM in forum Hyundai Kia
    Replies: 2
    Last Post: 09-21-2011, 04:43 PM
  4. SX3 2x spindle belt
    By PEU in forum Syil Products
    Replies: 9
    Last Post: 08-02-2008, 05:14 PM
  5. Kia Vx500 W/ Fanuc Control
    By tadlon in forum Uncategorised MetalWorking Machines
    Replies: 3
    Last Post: 08-11-2007, 05:49 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •