Hi All
Any one know of a post processor for Catia V5
My mill uses Gecko controls
OddMan
Hi All
Any one know of a post processor for Catia V5
My mill uses Gecko controls
OddMan
IMS and Cenit.
I'm having problems generating G-Code with Catia V5.
There are choices in Options/Machining, and some in the NC generation dialog, but i don't know which to choose.
I used to use MasterCAM X, and there generic post processor (MPFAN.PST) worked great (attached). I also attached a sample G-Code file that works on my machine.
Can anyone help me out?
Thanks
aleks.