584,861 active members*
4,979 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jan 2007
    Posts
    1

    Daewoo Fanuc O-M Yr1999 Orientation Problem

    My machine orientation is abnormally stop at various position after command M19. Each time in different positions.
    Its actually started after I replace the timing belt for spindle(broken) and the external position encoder.
    I did not make any parameter changing yet.

    Can Anyone let me know how to solve this problem.
    Thanks in advance.

    matsapind

  2. #2
    Join Date
    Feb 2007
    Posts
    3
    Is Your Chuck LOCKING?you Will Have To Reset Your Machine Parameters To Eliminate This Problem.i Just Had To Do It Myself.just Make Sure You Switch Power Off And Then On Again For The Changes To Work.

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •