Hello All,
Can anyone tell me if a late 1980's Leadwell MCV-550S only came with a 10HP spindle motor, or did it have options for other sizes?
Thank you for the help!
Hello All,
Can anyone tell me if a late 1980's Leadwell MCV-550S only came with a 10HP spindle motor, or did it have options for other sizes?
Thank you for the help!
Hi Again,
I found the answer I was looking for basically, in the power requirements. It requires 40 amps @ 220V, 3 phase of course. Thought I would add this in case someone else is searching some day. BTW...Leadwell and Campat Machine Tool were both very pleasant and helpful when I was inquiring about the machine. Sometimes companies don't want to help with old machines, so this was a positive experience.