585,733 active members*
4,983 visitors online*
Register for free
Login

Thread: MAXPRO200 using H35 plus N2

Results 1 to 3 of 3
  1. 05-26-2016, 07:23 PM #1
    Bestmark
    Bestmark is offline Registered
    Join Date
    Sep 2012
    Posts
    3

    MAXPRO200 using H35 plus N2

    Jim, I am thinking about to cut with MAXPRO200 using H35 plus N2 instead N2/N2 according manufacturer manual onformation. Do you know if anybody has tested it yet ? I am not sure the consumables will give to me good results for stainless steel.

    thanks
    Reply With Quote Reply With Quote
  2. 05-26-2016, 07:51 PM #2
    jimcolt's Avatar
    jimcolt
    jimcolt is offline Registered
    Join Date
    Jan 2008
    Posts
    2247

    Re: MAXPRO200 using H35 plus N2

    Bestmark,

    The MaxPro200 is not designed for use with H35 (which is 35% hydrogen, 65% argon). This gas is considered explosive, and would need a different style gas delivery system, as well as different consumable designs to be safe. I do not recommend using any gases other than the ones listed in the operators manual cut charts.

    Best regards, Jim Colt
    Reply With Quote Reply With Quote
  3. 05-26-2016, 08:21 PM #3
    Bestmark
    Bestmark is offline Registered
    Join Date
    Sep 2012
    Posts
    3

    Re: MAXPRO200 using H35 plus N2

    Thanks Jim
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Watch the MAXPRO200 cut with a GoPro mounted on the plasma torch
    By DDelaney in forum Videos
    Replies: 0
    Last Post: 02-14-2014, 11:32 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules