585,763 active members*
3,996 visitors online*
Register for free
Login
IndustryArena Forum > Hobby Projects > Musical Instrument Design and Construction > Builuding my 3rd Guitar - A Martin 00 Style Acoustic
Page 3 of 3 123
Results 41 to 45 of 45
  1. #41
    Join Date
    Aug 2010
    Posts
    134

    Re: Builuding my 3rd Guitar - A Martin 00 Style Acoustic

    This week, you're 100% caught up with the progress on this guitar. I start out finishing up the sanding the pore filler. After that, I start masking the sides and neck. It's time to get the burst on the front part. After a couple quick test runs, I landed on the color recipe that works. Then it's just a matter of spraying the burst for real ... Thanks for watching!

    https://www.youtube.com/watch?v=X4G7dkuB0vw
    Jason Beam
    Sacramento, CA

  2. #42
    Join Date
    Aug 2010
    Posts
    134

    Re: Builuding my 3rd Guitar - A Martin 00 Style Acoustic

    This week, I'm afraid, has been a bit of a disappointment. I went ahead and sanded the burst, but because it was just dye, no binders, a lot of the pigment came out very unevenly. I'm not pleased with how the burst looks now and will have to redo it.

    I'm fighting some serious project fatigue at this point, too, so I apologize for how little content this week's episode contains. I'll get it sorted. This guitar will be finished!

    Thank for watching!

    https://www.youtube.com/watch?v=GwGj6LpX320
    Jason Beam
    Sacramento, CA

  3. #43
    Join Date
    Aug 2010
    Posts
    134

    Re: Builuding my 3rd Guitar - A Martin 00 Style Acoustic

    FINALLY some progress on the 00! After much hemming and hawing, I finally tackle the burst once and for all (I hope). A slight change to the formula this time - I try out a mask and also adjust the color spray a little bit by adding some shellac to the mix. Finally back after it!

    https://www.youtube.com/watch?v=hgpF11WXDvI
    Jason Beam
    Sacramento, CA

  4. #44
    Join Date
    Aug 2010
    Posts
    134

    Re: Builuding my 3rd Guitar - A Martin 00 Style Acoustic

    At long last, I finally got this footage edited! The progress continues! I'm pleased with the burst, thankfully. Just a little sanding and minor touch ups needed. Then, some months-old masking tape removal -- what a mess! After that we tackle side dots and a small repair is necessary. I believe we're ready to start putting down a finish on this little fella!

    Thanks for watching!

    https://www.youtube.com/watch?v=6F_x2xOc2I0
    Jason Beam
    Sacramento, CA

  5. #45
    Join Date
    Aug 2010
    Posts
    134

    Re: Builuding my 3rd Guitar - A Martin 00 Style Acoustic

    This episode marks the long-awaited start of the finishing process!!! After a little masking off, and assembling of the finishing tent, it's time to finally put some lacquer on this thing! A coat of sanding sealer and a couple coats of gloss lacquer go on and I get my first look at this beautiful walnut. Things are looking good!

    Thanks for watching


    https://www.youtube.com/watch?v=XC-hoo-ODD8
    Jason Beam
    Sacramento, CA

Page 3 of 3 123

Similar Threads

  1. Acoustic . electric/ Guitar Build
    By rusty999 in forum Musical Instrument Design and Construction
    Replies: 1
    Last Post: 01-17-2016, 01:23 AM
  2. Looking to get a custom acoustic guitar scanned in Atlanta area.
    By osoloco69 in forum RFQ (Request for Quote)
    Replies: 0
    Last Post: 07-05-2015, 10:50 AM
  3. Acoustic Guitar
    By HelicopterJohn in forum MetalWork Discussion
    Replies: 0
    Last Post: 03-18-2013, 12:37 PM
  4. Anyone made an acoustic guitar?
    By NeoMoses in forum Musical Instrument Design and Construction
    Replies: 17
    Last Post: 01-02-2007, 01:45 AM
  5. Acoustic Guitar Rosettes
    By jemmyell in forum Musical Instrument Design and Construction
    Replies: 0
    Last Post: 07-17-2003, 05:26 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •