585,932 active members*
3,809 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > Mastercam > Post Processors for MC > post processor heidehain itnc 530 for mastercam x9

Thread: post processor heidehain itnc 530 for mastercam x9

Results 1 to 7 of 7
  1. 05-29-2016, 10:35 PM #1
    tlago
    tlago is offline Registered
    Join Date
    May 2016
    Posts
    1

    post processor heidehain itnc 530 for mastercam x9

    Need a heidenhain post processor for mastercam x9, if not for x9, problably for x7 and x8 will work also with the wisard

    thanks.
    Reply With Quote Reply With Quote
  2. 12-25-2016, 02:40 PM #2
    mastercnc1 Guest

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi

    i also need this
    Reply With Quote Reply With Quote
  3. 08-02-2017, 10:33 PM #3
    WillDWill
    WillDWill is offline Registered
    Join Date
    Aug 2017
    Posts
    2

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi, I would also like this post. Hard to find... 3axis conversational format.. mx7 for heid iTNC530...
    Reply With Quote Reply With Quote
  4. 08-03-2017, 02:34 PM #4
    malmil_bob
    malmil_bob is offline Registered
    Join Date
    Jul 2017
    Posts
    10

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi guys,..

    Try this,..
    Reply With Quote Reply With Quote
  5. 08-03-2017, 09:14 PM #5
    WillDWill
    WillDWill is offline Registered
    Join Date
    Aug 2017
    Posts
    2

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi, I tried this. It does not seem to pick/use it when I select it..Could it be because i'm using X7 and you gave it in X9?
    Reply With Quote Reply With Quote
  6. 08-03-2017, 11:28 PM #6
    malmil_bob
    malmil_bob is offline Registered
    Join Date
    Jul 2017
    Posts
    10

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi WildWill, Yes,...it's a X9 post processor file. You can not use with X7.
    Reply With Quote Reply With Quote
  7. 08-04-2017, 01:31 AM #7
    malmil_bob
    malmil_bob is offline Registered
    Join Date
    Jul 2017
    Posts
    10

    Re: post processor heidehain itnc 530 for mastercam x9

    Hi WindWill,..

    This one for X6,.. you can update for X7.
    Reply With Quote Reply With Quote
« Previous Thread | Next Thread »

Similar Threads

  1. Post Processor for a Heidenhain iTNC-530 control
    By machinster in forum Surfcam
    Replies: 3
    Last Post: 10-02-2013, 12:50 AM
  2. 4 axis bridgeport heidehain post processor
    By moram5 in forum PowerMILL
    Replies: 2
    Last Post: 12-08-2010, 09:02 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •  

Forum Rules