Originally Posted by
LeeGlen
Hi Dean, what I did was skipped the RJ45 hookup on my WJ200 VFD by clipping the plug off and wired it directly to the terminals. The 2nd thing was to change the jumper on the VFD, not having the VFD in front of me, I don't remember which terminal I connected it to. Check the manual and if you are using the HY, they may not be the same. All I know it started working and has since. Hope that makes sense. If you go to CNC4pc for info, check under C32 docs for wiring a WJ200 to rev5.
Jake