Hi.
I have a problem with posting 4 axis program. Our rotary axis i set to turn regards to ISO, but Bobcad generates program in other standard. How change post to reverse the direction of rotary axis? I've tried to change #442 parameter but it doesn't work. It only changes first position block.
I've read this article :
4 Axis Wrapping
but it doesn't helped and everything is still mirrored.
With this parameters program looks like :
Code:
PARAMETERS
440. What is the rotary output type (0=Abs Pos, 1=Signed ABS, 2=Signed Continuous) ? 2
441. Multiaxis feed type (0=UPM, 1=INV on all, 2=INV on Rotary, 3=INV on 4 and 5 Axis) ? 2
442. Wrapping X axis is (1=primary, 2=secondary, 3=tertiary)? 1
Code:
PROGRAM
%
O100
( PROGRAM NAME -BOBCAD2.NC)
( DATE = FRI. 06/03/2016 TIME = 01:38PM)
N001G21
N002G0G17G40G49G80G90
(T2100 = 12.7 DIA. ENDMILL FINISH)
(Machine Setup - 1 Profile Finish)
(FEATURE 2 AXIS)
N003G5.3P80
N004T2100M06
N005G90G54X16.35Y0.A180.S595M3
N006A180.
N007Z179.4M8
N008Z159.08
N009Z156.54
N010G1Z142.F42.3787
N011A-11.734F84.7574
N012X16.352A-11.785
N013X16.354A-11.807
N014X16.356A-11.823
N015X16.363A-11.848
N016X16.369A-11.868
N017X16.375A-11.883
N018X16.387A-11.909
N019X16.396A-11.925
Code:
PARAMETERS
440. What is the rotary output type (0=Abs Pos, 1=Signed ABS, 2=Signed Continuous) ? 2
441. Multiaxis feed type (0=UPM, 1=INV on all, 2=INV on Rotary, 3=INV on 4 and 5 Axis) ? 2
442. Wrapping X axis is (1=primary, 2=secondary, 3=tertiary)? -1
Code:
PROGRAM
%
O100
( PROGRAM NAME -BOBCAD2.NC)
( DATE = FRI. 06/03/2016 TIME = 01:38PM)
N001G21
N002G0G17G40G49G80G90
(T2100 = 12.7 DIA. ENDMILL FINISH)
(Machine Setup - 1 Profile Finish)
(FEATURE 2 AXIS)
N003G5.3P80
N004T2100M06
N005G90G54X16.35Y0.A180.S595M3
N006A-180.
N007Z179.4M8
N008Z159.08
N009Z156.54
N010G1Z142.F42.3787
N011A-11.734F84.7574
N012X16.352A-11.785
N013X16.354A-11.807
N014X16.356A-11.823
N015X16.363A-11.848
N016X16.369A-11.868
N017X16.375A-11.883
N018X16.387A-11.909
N019X16.396A-11.925
What should i do to reverse axis direction?? Please help!