While waiting for the UC400ETH board and the UCCNC software key I have been trying to get myself familiar with the DEMO version.
I can't seem to find the a way to switch between metric and inch or diameter and radius in the setup configuration file, I assume that it is not available in the Demo or am I overlooking it.
Bob
Results 1 to 12 of 12
Threaded View
-
06-05-2016, 03:46 PM #1
Registered
- Join Date
- Jan 2014
- Posts
- 57
UCCNC setting up metric/inch and Diameter/radius
Reply With QuoteSimilar Threads
-
Setting to change cutter comp from Radius(R) to Diameter(D)?
By Cavi Mike in forum FanucReplies: 5Last Post: 11-27-2014, 08:28 PM -
Metric to Inch
By Noquarter in forum Education - Teachers and Students HangoutReplies: 3Last Post: 10-17-2012, 05:37 PM -
Inch,Radius => Metric,Diameter Post Processor Convert !
By AbuTarif in forum Post Processor FilesReplies: 0Last Post: 06-21-2011, 05:48 PM -
DRO - Metric or Inch
By DJ Morrow in forum CNC Machine Related ElectronicsReplies: 2Last Post: 11-15-2004, 09:06 PM
Tags for this Thread
Posting Permissions
