[riccardo]

Hello.

I need a post for a lathe Fanuc 16iTB or Fanuc 0iTC

I try with fanuc post but i have a problem with C axis.

Please help me .

bye

[mikewsk2]

You can try this one, it should get you close. I will watch this thread if you have any questions or tweaks.

[riccardo]

hello


This work
%
O0001
N10 (CONTORNATURA)
N15 (EC140B25-3C14)
N20 T0101
N25 M10
N30 G28 C0.
N35 G97 S2273 M74
N40 G17
N45 G00 X51. C0.
N50 Z50.
N55 Z2.
N60 G98 G01 Z-23.2 F409
N65 G112
N70 G41 X36.151 C7.425
N75 G03 X30. C0. R10.5
N80 X70. R10.
N85 X30. R10.
N90 X36.151 C-7.425 R10.5
N95 G40 G01 X51. C0.
N100 G113
N105 Z-21.2
N110 G00 Z50.
N115 X300. Z300.
N120 M75
N125 M11
N130 M30
%

[Mike Mattera]

What did the code look like from the Edgecam output?
What needs to be changed?
Does it run the machine, or you just dont like the way it looks?

Mike

[riccardo]

Hello.
Can yous ee this example.

By

[mikewsk2]

I did a little bit of tweaking to the post that I sent the other day and it's there except for a couple of M codes. They can easily be added wherever they are needed. Once again, Code Wizard can you get you 95% there right out of the box, the things that do need tweaking are usually in the toolchange areas and program start.

I am sending the edited post and ppf

[Kai_DK]

Ahh, it sure looks like the programs I make on my SL150SMC.
I'm "stealing" this post, and hope to be able to convert it.
Thanks.