584,861 active members*
4,643 visitors online*
Register for free
Login
Results 1 to 9 of 9
  1. #1

    Serious Issue :(

    So One a side note I had a problem today with my small cnc machine and I am not sure why it happened can anyone let me know as to why this happened?


    hello everyone I had something bad happen today I waited 3 days for this piece of material and look at what happened







    Can anyone tell me what happened?

    I designed in Fusion 360
    sent to Universal Gcode Sender Version 1.0.9/ Nov 11 2015

    and cut on X-carve

    any help would be appreciated thanks

  2. #2
    Join Date
    Jun 2014
    Posts
    777

    Re: Serious Issue :(

    Can you attach the gcode to this post.

  3. #3

    Re: Serious Issue :(

    yes I can here are the 3

    well actuall it wont let me upload a .nc file any suggestions?

  4. #4

  5. #5
    Join Date
    Jun 2014
    Posts
    777

    Re: Serious Issue :(

    Firstly though not the issue here but you should really get into the practice of outputting all operations into a single file. If you have toolchanges use m6 macro, for manual toolchange some control software you select it to pause and wait for cycle start when m6 in called upon in code. Or you may need to modify the m6 macro to work to this effect.

    Just rename the nc file as .txt I believe.

    I'll see if I can open your code when I'm back in the office

  6. #6

    Re: Serious Issue :(

    okay thanks

    and yeah I know I am pretty new to cnc but with my large cnc that I just bought I need to learn gcode a bit better I will be running mach3 on that machine but I need to learn alot for now it just seemed like the easy way to get around manual tool changes by breaking up the files by tool

  7. #7
    Join Date
    Mar 2003
    Posts
    35538

    Re: Serious Issue :(

    Apparently Universal G-Code Sender didn't like the g-code format.
    Gerry

    UCCNC 2017 Screenset
    http://www.thecncwoodworker.com/2017.html

    Mach3 2010 Screenset
    http://www.thecncwoodworker.com/2010.html

    JointCAM - CNC Dovetails & Box Joints
    http://www.g-forcecnc.com/jointcam.html

    (Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)

  8. #8

    Re: Serious Issue :(

    werid I have never had a problem like this before with universal gcode sender

  9. #9

    Re: Serious Issue :(



    finally got it to work today lol
    Attached Thumbnails Attached Thumbnails 20160620_132435.jpg  

Similar Threads

  1. Seems Z and A axis are not running...Motor issue or Step/Dir issue?
    By Cattle in forum Mach Software (ArtSoft software)
    Replies: 1
    Last Post: 04-12-2016, 08:51 PM
  2. Replies: 1
    Last Post: 01-08-2016, 06:58 AM
  3. Little issue with G10
    By Myrmidon in forum Fanuc
    Replies: 10
    Last Post: 03-16-2015, 02:34 AM
  4. Cambam issue or Mach 3 Issue??
    By tracyranson in forum CamBam
    Replies: 11
    Last Post: 07-11-2011, 04:03 PM
  5. Help with selector switch wiring issue (***actually a motor issue***)
    By BEDFORD in forum Charter Oak Automation Support Forum
    Replies: 7
    Last Post: 04-07-2006, 09:19 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •