Hey guys, I just acquired a Mori Seiki sl15. What i realize is the geometry for T 1 goes in offset 50 which is fine, but I also want to use Tool 1 with a different offset number, and I can't figure out how to accomplish this task. Any help would be greatly appreciated.

This program ran fine

N1 (FACE WNMG 432)
G0 G20
T0808
G50 S2200
G96 M04 S550
G00 X1.35 Z0.1
Z0.01
G01 X-0.0624 F0.012
Z0.02
G00 X1.35
Z0.
G01 X-0.0624 F0.008
G00 Z0.1
(ROUGH TURN)

Since this control doesn't have a G55, I'm trying to figure out how to use tool 8 with a different offset number. eg T0816.