508,361 active members
3,899 visitors online
Register for free
IndustryArena Forum > Machine Controllers Software and Solutions > Mori Seiki Software > Mori Seiki sl15 with yasnac lx3 tool offset
Results 1 to 2 of 2
  1. #1
    Join Date
    Mar 2015

    Mori Seiki sl15 with yasnac lx3 tool offset

    Hey guys, I just acquired a Mori Seiki sl15. What i realize is the geometry for T 1 goes in offset 50 which is fine, but I also want to use Tool 1 with a different offset number, and I can't figure out how to accomplish this task. Any help would be greatly appreciated.

    This program ran fine

    N1 (FACE WNMG 432)
    G0 G20
    G50 S2200
    G96 M04 S550
    G00 X1.35 Z0.1
    G01 X-0.0624 F0.012
    G00 X1.35
    G01 X-0.0624 F0.008
    G00 Z0.1

    Since this control doesn't have a G55, I'm trying to figure out how to use tool 8 with a different offset number. eg T0816.

  2. #2
    Join Date
    May 2016

    Re: Mori Seiki sl15 with yasnac lx3 tool offset

    I'm not sure I understand the problem. If you call T0816 you're going to get tool 8 with whatever offset value is stored in offset 16. You can use whatever offset you call in the last 2 digits.

Similar Threads

  1. Mori Seiki SL2 With YASNAC
    By Antonio Arguijo in forum Mori Seiki Mills
    Replies: 5
    Last Post: 05-19-2019, 11:12 PM
  2. Mori Seiki SL1 Yasnac LX2
    By Rick Jacobs in forum Mori Seiki lathes
    Replies: 8
    Last Post: 05-12-2019, 03:41 PM
  3. MORI SEIKI AL-2B / Yasnac LX-1
    By WMSMFG. in forum Mori Seiki lathes
    Replies: 1
    Last Post: 01-28-2015, 04:03 AM
  4. Mori Seiki CL-20A YASNAC
    By lalorockero in forum Mori Seiki lathes
    Replies: 4
    Last Post: 07-20-2013, 06:01 AM
  5. Mori Seiki SL15 dump parmeters & were not backup
    By john neathery in forum Machine Problems, Solutions , Wireless DNC, serial port
    Replies: 2
    Last Post: 08-08-2007, 01:47 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts