[soolom_1]

Hi All,

Please advise how to wiring limit&Home switches to TB6600 board

Board link : http://www.omc-stepperonline.com/dow...ers_Manual.pdf

[Jon.N.CNC]

Hi All,

Please advise how to wiring limit&Home switches to TB6600 board

Board link : http://www.omc-stepperonline.com/dow...ers_Manual.pdf

It's simple. The switch simply shorts the input pin to ground. Setup the port and pin for that particular input and you will see it register. So you attach all your switches to ground pin and one to each of your input pins. No particular order, you order them in the ports and pins configuration.

[soolom_1]

It's simple. The switch simply shorts the input pin to ground. Setup the port and pin for that particular input and you will see it register. So you attach all your switches to ground pin and one to each of your input pins. No particular order, you order them in the ports and pins configuration.

Thanks a lot Jon, So I connect all the switches (com) to GND and one to each NC to In1 pin ? should I connect anything to the v5 pin ?

thanks in advance

[soolom_1]

Plz close i was able to wire the switches:banana: