[Muggins]

Hello everyone,

I have an Arrow 1000 with an A2100 . I have what has become a frequent spindle related problem. I have attached the various alarms I get. (intermittently, every other cycle start ) I have taken the front cover off and checked for cracked/pinched wires and also for coolant or oil trappage. Nothing looks wrong. I have looked at the similar posts to try and figure it out but I am not seeing my problem. Can anyone give me a point in the right direction ?



Thanks in advance,

[meckardt55]

Have you done what the control error is telling you to do??

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

[Muggins]

Have you done what the control error is telling you to do??

MIKE CNC Machine Services INC | Cincinnati Milacron MachinesCNC Machine Services

I dont know the procedure to check spindle drift. I did mdi the S0M3 as it asked. It looked to orient but the spindle did not lock in place (like M19 on fanuc). How do I check drift and adjust?

Thanks