Yeap I've found the D-Pro Software, it should be attached as a Rar file(It won't let me, so if you want it PM me or somehow give me an email address so I can send it to you). If you've got an earlier 15S/18S etc then you'll need the Dpro-TC software for an 840C controller, the Dpro-TD software is for the later lathes than run an 840D control & the Dpro-TM is for those lathes with live tooling/milling capability. I haven't got a post processor for any cam software as I've never really needed it, though it shouldn't be hard to write one. If needed I can post up a sample MPF program which you should be able to load