509,658 active members
3,926 visitors online
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > Siemens Sinumerik CNC controls > Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?
Page 4 of 5 2345
Results 37 to 48 of 52
  1. #37
    Registered
    Join Date
    Jul 2012
    Posts
    15

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    thanks Atmosports we will try this as soon as we can and see what happens
    Garry Cox

  2. #38
    Registered
    Join Date
    Mar 2013
    Posts
    6

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    So have you guys had any luck, i just picked up one of these lathes as well, the controller is quite interesting things are hidden it seems in it.

  3. #39
    Registered
    Join Date
    Jul 2012
    Posts
    15
    Quote Originally Posted by awscwi11 View Post
    So have you guys had any luck, i just picked up one of these lathes as well, the controller is quite interesting things are hidden it seems in it.
    It seems like There are a few on here that run these with no problems I need to get mine going as well but other priorities have temporarily pulled me away from this ,mainly a learning curve I think because mine are built well and do all the movements good just a little different than the controls we are used to such as Fanuc or Haas
    Good luck with the new toys keep us updated as you progress
    Coxfive

  4. #40
    Registered
    Join Date
    Mar 2013
    Posts
    6
    Quote Originally Posted by atmosports View Post
    Hopefully this will help get you going. Somewhere at home I've got a zip file with the Hyundai D-Pro software, but it really only works ok on a pre windows-XP computer or run in a virtual machine running windows versions before XP. I've got a Hit 15s/18s Manuals, not sure on the Hitrol programming one. I've also got the Hyundai turret realignment procedures etc


    Did you have a post processor that works with any other cam software's, we're you able to find the d pro program? And what part do you add to your file to get the controller to accept it when loading a file?

  5. #41

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    Yeap I've found the D-Pro Software, it should be attached as a Rar file(It won't let me, so if you want it PM me or somehow give me an email address so I can send it to you). If you've got an earlier 15S/18S etc then you'll need the Dpro-TC software for an 840C controller, the Dpro-TD software is for the later lathes than run an 840D control & the Dpro-TM is for those lathes with live tooling/milling capability. I haven't got a post processor for any cam software as I've never really needed it, though it shouldn't be hard to write one. If needed I can post up a sample MPF program which you should be able to load

  6. #42
    Registered
    Join Date
    Nov 2006
    Posts
    409

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    Quote Originally Posted by atmosports View Post
    Yeap I've found the D-Pro Software, it should be attached as a Rar file(It won't let me, so if you want it PM me or somehow give me an email address so I can send it to you). If you've got an earlier 15S/18S etc then you'll need the Dpro-TC software
    You've got PM's blocked.

    Sent from my SM-G920V using Tapatalk

  7. #43
    Registered
    Join Date
    Mar 2013
    Posts
    6

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    I wanted to let everyone know, we got the pc to link, got a file in, i tried it and it works lol, i have a post processor for fusion 360 hsm that does work, it took a little bit to figure it all out but shes up and running.

  8. #44

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    If/when I get some time I'll try again to post the D-pro software here or somewhere so that people can grab a copy

  9. #45
    Registered
    Join Date
    Mar 2013
    Posts
    6

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    Sounds good or email me lawsonwelding at gmail dot com, Have you ever had a problem with the spindle knocking at slow rpms, like maybe the encoder is slipping, perhaps the belt needs something, over 500 its smooth as a whistle, under it starts making noise.

  10. #46

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    I can't say we've ever had a spindle knock at low rpm, we did have a problem where one of them wouldn't run faster than about 500rpm which from memory was one of motor contactors or something like that in the back of the cabinet. The only real issues we've ever had have been tailstock proximity sensors & then the displays failing or power supplies to the displays failing. Except for our 15s which started to eat 9V batteries, it seems there is a fault on one of the cards but Siemens can't tell us which one & want us to keep buying new ones until we find which one it is, I've just wired in a 9V power supply which keep the memory going unless the power goes out, which happens about once a year

  11. #47

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    Tried attaching the software here again, won't work, tried emailing it but also doesn't seem to work for most people. So try this instead DPRO_ENG

  12. #48
    Registered
    Join Date
    Mar 2013
    Posts
    6

    Re: Siemens 840C on a '96 Hyundai HiT 30S.........Where do you even begin!?

    I am having a problem with the 840c external threading cycle, when i input a negative value into R24 the controller stops at the start point and will not run the program, if i input a positive value it runs the program but rapids back into the part. I have tried everything i can think of any help would be appreciated, here is a copy of some code, i have changed z values and distances from what i am trying to do just to dumb it down for myself.

    M05
    (LATHE THREAD)
    T1 D1
    G54
    G95 S500 M03
    G00 Z.25 X2.146
    G0 @100 K99
    ( Thread cutting external )
    ( R20 = Thread pitch R21 = Start X )
    ( R22 = Start Z R23 = Idle passes )
    ( R24 = Thread depth R25 = Finish allowance )
    ( R26 = Run in R27 = Run out )
    ( R28 = Rough cuts R29 = Infeed angle )
    ( R31 = End X R32 = End Z )
    N99 R20=0.05 R21=1.7459 R22=0.0 R23=3 R24=-0.05 R25=0.0001
    R26=.250 R27=0. R28=1 R29=0 R31=1.7459 R32=-1.0 L97 P1
    G0 X5. Z1.25
    Z5.0
    M05
    (LATHE DRILL)

Page 4 of 5 2345

Similar Threads

  1. Hyundai HIT18s with Siemens 840C ...I killed it.
    By BNR_RANDY in forum Hyundai Kia machine
    Replies: 11
    Last Post: 11-14-2019, 09:52 PM
  2. Hyundai HiT 18s CNC lathe with Siemens 840c control
    By c-martin in forum Hyundai Kia machine
    Replies: 7
    Last Post: 11-14-2019, 09:51 PM
  3. Hyundai Hit30s - Siemens 840C
    By Web.eng in forum Hyundai Kia machine
    Replies: 14
    Last Post: 12-14-2016, 08:01 AM
  4. post for Hyundai Hit-15s Siemens Sinumerik 840c
    By borutapl in forum Post Processors for MC
    Replies: 0
    Last Post: 03-04-2016, 03:07 PM
  5. Hyundai Hit8s with siemens 840c
    By Marx in forum Hyundai Kia machine
    Replies: 2
    Last Post: 05-30-2009, 08:58 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •