[smokediver576]

Hey Folks,

Trying to post out of Fusion360 to a 2001 Emco PC Turn 105 running the WinNC - Fanuc 21T controls. I've tried to get the generic fusion/Fanuc lathe post to work but it had error issues.

Anyone got a post they can share with me?

Thanks,
Awall

[smokediver576]

I keep getting the same alarm message no matter how I enter the data.

It's calling out: Alarm 2600 - End of program without M30

I've checked and the M30 command is there. I've manually gone in and edited the file and still, no luck......

Code below (simple face on 1/2" stock with Tool 3):

O0010
N10 G98 G18
N11 G20
N12 G50 S3000
N13 G28 U0.

(FACE2)
N14 T0303
(EMCO TOOL 3)
N15 G54
N16 G98
N17 G97 S1000 M3
N18 G0 X0.5 Z0.1969
N19 G0 Z0.0566
N20 G1 X0.6131 F39.3701
N21 X0.5 Z0.
N22 X-0.0625
N23 X0.0506 Z0.0566
N24 G0 X0.5
N25 Z0.1969

N26 G28 U0. W0.
N27 M30
%

[turbo329is]

Did you ever solve this? I got a 1999 PC turn 55 this week and I'm also using Fusion 360. It seems that my machine uses fanuc 0-TC even though all the manuals that came with it were for Fanuc 21. I'm not sure if it's the same format.

Anyway I can't get it to import code off of the A or C drives. I'm thinking I need to put a folder directory in somewhere, but can't figure it out. Apperently the Emco-USA guy is on vacation right now.