[NeubieCNC]

Hello!

I would like to know if it is possible to control ac-servo driver YASKAWA servopack CACR-SR with Mach3 ?
Any further information is highly appreciated

[mactec54]

Hello!

I would like to know if it is possible to control ac-servo driver YASKAWA servopack CACR-SR with Mach3 ?
Any further information is highly appreciated

You would need more information than just CACR-SR, check the Yaskawa web site they have a lot of good information there, if the unit you have can take Step/Dir signals, then it will work with Mach3

[JAKEFREESE]

You should be able to as long as you can get a 0-10VDC analog signal to the servopack. I have CACR-SR10BB1BF drives in my Hurco driven with Pico Systems PPMC on Linux CNC.

I would imagine one of the M3 systems can provide a 0-10v signal for each axis.

Should be pins 14,15 on the servopack. But to verify need the rest of the part number on the drive.

[NeubieCNC]

Thanks a lot for replies! I sent an inquiry to Yaskawa company