502,388 active members
8,266 visitors online
Register for free
Login
IndustryArena Forum > CAM Software > Uncategorised CAM Discussion > GrblGru: Free CAM and 3D-Simulation for mills and lathes
Page 18 of 18 8161718
Results 205 to 213 of 213
  1. #205
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Hi Armando,

    thanks for the information. Of course you're right. This is a bug.
    But you can easily correct it. You only have to increase the value "H Width" e.g. H = 12 .



    Unfortunately I have to disappoint you. I am only a man, but thanks for the nice words.

  2. #206
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Release notes V3.38

    In my new program version V3.38 I once again worked with the function G38.2 for milling.
    This good and at the same time easy to use function makes it possible to scan uneven surfaces, e.g. to engrave them afterwards.
    The same applies to the production of PCBs, where any unevenness must be compensated.
    GrblGru also offers the possibility to scan STL objects in simulation mode.

    Download, as usual from my website at 403 Forbidden

    Have fun with GrblGru


  3. #207
    Registered
    Join Date
    Jun 2007
    Posts
    12

    Re: GrblGru: Free CAM e simulação 3D para moinhos e tornos

    Hi GrblGru,
    The expression I used, is sincere thanks for your work.

    One more bug I found by clicking the JogBackwardRight button.

    See image in the debug window is in portuguese of Brazil. (portuguese-BR)
    Where he quotes:
    GrblGru.Form1.JogBackwardRight()
    toe.Controls.CtrlRepeatButton.CtrlRepeatButton_Mou seDown(Object sender, MouseEventArgs e)

    The version 3.28.0 works correctly.

    Armando

  4. #208
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Armando,

    sorry for the delay in answering. I've only just seen your mail.
    There is a bug in simulation mode. In real mode everything is ok.
    That's why I didn't notice it.
    I fixed the bug in the new beta version V3.38.6 on my website.

    Many thanks for your help.

  5. #209
    Registered
    Join Date
    Jul 2006
    Posts
    6

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Gary,

    I finally managed to attach the file. Silly me...

  6. #210
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Release notes V3.39

    the topic of measuring and probing with the help of the G38.2 function hasn't quite let go of me yet.
    It's fascinating what you can do with a 10 Euro Arduino and the GRBL program.

    A friend of mine provided me with an old discarded probe, with which I could demonstrate the handling in the attached video.
    Since I unfortunately have a tendency to use temporary solutions, the mounting of the probe is rather suboptimal.
    But my main goal was to be able to show the actual measuring.

    In the new version, I have also extended the measurement spectrum so that you can now measure in all directions.
    This makes it possible to measure angles, find centers and much more.


    Free download from my website at 403 Forbidden

    Have fun with GrblGru


  7. #211
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Release notes V3.40

    I have recently been repeatedly referred to the clamping board I used in the last video. That's why I decided to introduce my self-made clamping system and of course the small clamping device.
    For those who want to try it out in practice, I have also included a template in the program. This should make it possible to create an individual, tailor-made design.

    As usual the short video shows the necessary handling. The program version can be downloaded from my website.

    Have fun with GrblGru


  8. #212
    Registered
    Join Date
    May 2016
    Posts
    116

    Re: GrblGru: Free CAM and 3D-Simulation for mills and lathes

    Release notes V3.41

    I have dealt once again with strategies for milling pockets and reworked the corresponding function in the new version V3.41.
    An overview of the currently available methods can be found in the short video.

    Have fun with GrblGru


  9. #213
    Member
    Join Date
    Aug 2019
    Posts
    2
    Thanks for sharing

Page 18 of 18 8161718

Similar Threads

  1. Affordable CNC Mills and Lathes
    By cweber in forum Uncategorised MetalWorking Machines
    Replies: 8
    Last Post: 04-20-2013, 10:44 AM
  2. D&M Lathes, Mills, etc.
    By boatlover in forum Benchtop Machines
    Replies: 0
    Last Post: 04-25-2008, 02:39 AM
  3. Birmingham Mills and Lathes
    By smilenbseen in forum Uncategorised MetalWorking Machines
    Replies: 23
    Last Post: 01-23-2007, 01:19 AM
  4. Birmingham Mills and Lathes
    By smilenbseen in forum Vertical Mill, Lathe Project Log
    Replies: 4
    Last Post: 01-02-2007, 01:42 AM
  5. Darn near FREE LATHES!!!! - 2 lathes, gotta go NOW!
    By mxtras in forum Uncategorised MetalWorking Machines
    Replies: 0
    Last Post: 03-22-2006, 07:43 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •