[yaleman]

I'm looking to build my own stock and was wondering if anyone's got files modelling the action/standard trigger for an R700? I've found some STL files but Sketchup Make can't open/convert them

[bill south]

Hey Yaleman;
The only decent models are presented on grabcad but I've not checked them for accuracy. I've been trying to find some models for a 700 stock and have little to no success. I want to do my own and have completed a long action aluminum bedding block so the hard part is done. If only I could find a model, drawing or anything other than a picture.
Good Luck.
Bill

[yaleman]

Hey Yaleman;
The only decent models are presented on grabcad but I've not checked them for accuracy. I've been trying to find some models for a 700 stock and have little to no success. I want to do my own and have completed a long action aluminum bedding block so the hard part is done. If only I could find a model, drawing or anything other than a picture.
Good Luck.
Bill

Those are the ones I can find too, but sadly they're in STL format which my program can't open I'm going to try some other programs I guess, or give up and model it myself

I believe these specs are right: Quality Gunsmithing, Knife Making, Fabrication, and Design by Lonestarfab.com

[bill south]

Yaleman;
Did you ever source a model for a decent remy stock?
Thx.
Bill

[yaleman]

Sadly I haven't been able to find one, and other things got in the way of me modelling my own