584,879 active members*
5,240 visitors online*
Register for free
Login
Results 1 to 6 of 6
  1. #1
    Join Date
    Jul 2016
    Posts
    9

    Question 1997 Mitsubishi FX20 Wire EDM Load Disks

    Hello everyone,
    I am a teacher at a Tech School near Los Angeles CA
    We have a 1997 Mitsubishi FX20 Wire EDM
    I moved the machine from Reno NV and lost the parameters.
    I re-connected the machine and load the parameter disks and e-pack disks
    I can not get the machine to cut I get a U828 "Clean Seal Plate" Alarm
    Anybody has an idea what it may be?

  2. #2
    Join Date
    Feb 2009
    Posts
    51

    Re: 1997 Mitsubishi FX20 Wire EDM Load Disks

    do you have a seal plate cleaning program on the pack disk? If so load that and run that program.

  3. #3
    Join Date
    Apr 2016
    Posts
    39

    Re: 1997 Mitsubishi FX20 Wire EDM Load Disks

    put the fx on the maint screen,select the clean seal plate with the purple cursor and chage the parameter to 5000,then enter
    you will see the red bar change to green,all must be on green to continue the procedure...ok

  4. #4
    Join Date
    Jul 2016
    Posts
    9

    Re: 1997 Mitsubishi FX20 Wire EDM Load Disks

    Quote Originally Posted by Makrep View Post
    do you have a seal plate cleaning program on the pack disk? If so load that and run that program.

    Do you mean 99999300 ?

  5. #5
    Join Date
    Jul 2016
    Posts
    9

    Re: 1997 Mitsubishi FX20 Wire EDM Load Disks

    Quote Originally Posted by Armando2442 View Post
    Do you mean 99999300 ?
    I changed the clean seal plate on the maintenance screen to 5000 and was able to run a part but, when I reset the 5000 is erase.
    I tried to run the the clean seal plate but it dose not let me. I have a P32 address error

  6. #6
    Join Date
    Apr 2016
    Posts
    39

    Re: 1997 Mitsubishi FX20 Wire EDM Load Disks

    Quote Originally Posted by Armando2442 View Post
    I changed the clean seal plate on the maintenance screen to 5000 and was able to run a part but, when I reset the 5000 is erase.
    I tried to run the the clean seal plate but it dose not let me. I have a P32 address error

    sorry,put #1,+input,this will turn the red bar on green,whith this you can continue....
    the E-PACK floppy drive is not for that

Similar Threads

  1. Mitsubishi FX20 EDM - X-Axis Compensation
    By jtmueller10 in forum Mitsubishi controls
    Replies: 0
    Last Post: 08-05-2014, 11:28 AM
  2. Mitsubishi FX20 EDM - X-Axis
    By jtmueller10 in forum Mazak, Mitsubishi, Mazatrol
    Replies: 0
    Last Post: 08-04-2014, 03:08 PM
  3. Mitsubishi FX20 Chiller issue
    By EDoucette32 in forum EDM Discussion General Topics
    Replies: 3
    Last Post: 07-30-2013, 12:50 PM
  4. mitsubishi FX20 software
    By eroprel in forum EDM Discussion General Topics
    Replies: 3
    Last Post: 01-23-2013, 02:21 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •