Hi Gerry
Attached are the macros I have modified if you can review and make any changes or recommendations I would appreciate it. This is my first attempt at modifying macros.
Thanks
Bill I
M884
DoButton( 24 )
Code "G53 G0 Z-2"
'While IsMoving()
'Wend
DoButton( 23 )
Code "G53 G0 Y1.25"
'While IsMoving()
'Wend
DoButton(22)
Code "G53 G0 X4.0"
'While IsMoving()
'Wend
DoOemButton(1008)
DoOemButton(1009)
M885
DoButton(22)
Code "G53 G0 X4.0"
DoOemButton(1008)
M886
DoButton(23)
Code "G53 G0 Y1.25"
DoOemButton(1009)
M887
DoButton(24)
Code "G53 G0 Z-2"
While IsMoving()
Wend
DoOemButton(1010)