Hi All
My first post in the WinCNC section of CNC zone.
I used a friend of mines Shop Sabre 7214 router today with WinCNC, I went armed with NC code produced in BobCAD V28 using the Shopsabre post supplied by BobCAD.
As soon as the control got to the line no 6 with T1 in it stopped and said missing file. I got over the problem by manually editing T1 out and then doing a seperate NC file for where tool 2 was called up.
I dont like not understanding this. I had hoped to do a manual tool change and set T2 onto top of stock as per T1.
G90
G0 Z10.
G0 X0 Y0
M5
M51
T1
M3
S15000
G4 X4
M50
>>>>>>>>> cont.
So I downloaded a post file from WinCNC to use with BobCAD and that turned out the following code which never called up a tool as far as I can see, does not even look like it has started the spindle!!
[ PROGRAM NUMBER: 100 ]
[ PROGRAM NAME: VAC BED TOP WINCNC.NC ]
[ POST: WINCNC ]
[ DATE: TUE. 07/19/2016 ]
[ TIME: 02:23PM ]
[12.2mm MDF]
[Grid will cut 3.5mm deep]
[Circular hole will not break free to save damaging cutter]
[Outer will be done in two passes with a tab at either end]
[ T1ENDMILL ROUGH , DIAMETER = 3. , LENGTH = 45. ]
[ T2ENDMILL ROUGH , DIAMETER = 6. , LENGTH = 60. ]
N01 G90
N02 G53
N03 G54
[Machine Setup - 1 Profile Rough]
[GRID 1]
N04 G00 X63.75 Y335.
N05 Z5.
N06 Z2.5
N07 G01 Z-3.5 F500.
N08 Y55. F2000.
So my question is how do you do a manual tool change with the WinCNC control ie what code do you use, for the life of me I have not been able to find the info.
Once I know what is required in terms of code then I will edit the BobCAD post to get the correct code.
Many Thanks
Barrie