584,817 active members*
4,893 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2016
    Posts
    1

    retired disabled manager

    hi everyone. I am a disabled/retired engineering mgr with 25+ years experience in machine controls etc. I am now building my own using Arduino and Linux CNC I am interested in drilliing, milling, slotting and engraving to support a small electronics mfg operation. I will be using rotary engrving and laser. I would appreciate any help and advice I can get. thank you

  2. #2
    Join Date
    May 2006
    Posts
    803

    Re: retired disabled manager

    Well good, join the retired/disabled/having more fun than I should club. I've been doing this for a while AND first thing,,,, what do you wish to produce??? Do everything else prior to the machine before design and program, then rent others machines. that's what the big Aerospace giants do. What CAD are you using? i
    Been doing this too long

Similar Threads

  1. CNC manager/ tooling manager FLA COAST
    By BILL WRIGHT CCR in forum Employment Opportunity
    Replies: 0
    Last Post: 05-05-2013, 09:01 PM
  2. Material Manager/Purchasing Manager - IL
    By MachiningJobs in forum Employment Opportunity
    Replies: 2
    Last Post: 05-23-2011, 04:04 PM
  3. retired engr
    By retired engr in forum DIY CNC Router Table Machines
    Replies: 9
    Last Post: 12-07-2009, 08:16 PM
  4. retired toolmaker/cnc programmer
    By weeli in forum Stepper Motors / Drives
    Replies: 9
    Last Post: 11-26-2009, 05:12 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •