Hello Everyone
Im new here but I literally had no one else to ask so please forgive me if I am breaking some Forum Rules unknowingly.
I purchased a 60W Laser Cutter from eBay. It says 7050 on the front but i have heard it is a copy of the Redsail x700?
I have had multiple problems with it and so far havent managed to get it to cut anything.
The rubber tubes on the laser tube were leaking, I seem to have fixed this now. However, there seems to be some water dripping from the connection points on the machine where the pump tubes connect, possibly from the inside?
I set the machine up. It frames the piece, I turn the laser on (no noticable difference?) but as soon as press Start, it beeps and stops and says WATER ERROR/WATER ERROR 1.
Obviously, the sellers are being of no help as their claims of being in the UK or even Germany are entirely false. I cannot find any information online relating to WATER ERROR and i am seriously out of ideas. It seems like i have been given a faulty machine. I am currently in talks with ebay to get a return but i was hoping to get this working.
Any suggestions would be much appreciated
Thanks
Wayne