I am trying to gather more parts for my Plasma table build. I have a couple NEMA34 640oz steppers I want to use for my gantry movement but i have no idea what power supply to use. I am using Gecko G201X drives and will use a rack and pinion type set up. Any suggestions? Any other information you would need to help? Thank you for any help you can provide.
Results 1 to 3 of 3
-
07-21-2016, 01:12 PM #1
Registered
- Join Date
- Oct 2015
- Posts
- 6
Power supply options for NEMA 34 640 oz stepper
-
07-21-2016, 01:24 PM #2
Community Moderator
- Join Date
- Mar 2003
- Posts
- 35538
Re: Power supply options for NEMA 34 640 oz stepper
What are the specs of the motors?
Gerry
UCCNC 2017 Screenset
http://www.thecncwoodworker.com/2017.html
Mach3 2010 Screenset
http://www.thecncwoodworker.com/2010.html
JointCAM - CNC Dovetails & Box Joints
http://www.g-forcecnc.com/jointcam.html
(Note: The opinions expressed in this post are my own and are not necessarily those of CNCzone and its management)
-
07-21-2016, 01:37 PM #3
Registered
- Join Date
- Oct 2015
- Posts
- 6
Re: Power supply options for NEMA 34 640 oz stepper
640oz, 4.5amps per phase bipolar parallel
Originally Posted by ger21
4 wire bi-polar
2phase, 4.05volt, .9ohms,
6.8mH resistance
Automation technologies part# KL34H280-45-4A
Sent from my iPhone using Tapatalk
Reply With QuoteSimilar Threads
-
Power supply options
By dcrowder79 in forum DIY CNC Router Table MachinesReplies: 1Last Post: 01-26-2016, 10:53 PM -
Power supply and Nema 17
By woodturn in forum Stepper Motors / DrivesReplies: 4Last Post: 02-13-2007, 05:11 PM
Tags for this Thread
Posting Permissions
