584,833 active members*
5,612 visitors online*
Register for free
Login
IndustryArena Forum > Machine Controllers Software and Solutions > WinCnc > Coaldale, CO WINCNC Controller and Vectric Seminar
Results 1 to 3 of 3
  1. #1
    Join Date
    Mar 2008
    Posts
    1762

    Coaldale, CO WINCNC Controller and Vectric Seminar

    Mark Your Calendars
    September 22 - 24, 2016

    CNC Seminars is excited to announce our next in a series of regional seminars,
    Attendee driven topics that provide much needed real world information and guidance.

    For more information Coaldale, Colorado » CNC Seminars


    This seminar will focus on the WINCNC Controller and Vectric Products.

    Providing information on the latest features of both and how they work best together.

    Even though there will be benefit to all CNC users, the greatest benefit will be gained by users that have machines that operate on WINCNC and use the Vectric design software of all experience levels.

    Our host for this seminar will be Tony Wish, of Coaldale, CO.

    His location is the perfect spot to interact and ask questions about your machine and how you can apply effective methods to your CNC work.

    For more information Coaldale, Colorado » CNC Seminars

    WinCNC Class descriptions:

    WinCNC Basics: Common Tasks and What's on the Screen

    WinCNC Operation: Procedures to Ensure Ease of Daily Operation & Eliminate Errors

    WinCNC Offsets & Positions: Set and Manage User Offsets, Position & Home #'s

    Advanced WinCNC: Learn how to REALLY operate WinCNC, Learn to Read/Write GCode and Macros

    WinCNC Advanced Tuning: Using Parameters to Tune your Machine to your Products


    If you are really serious about knowing your machine and it’s inner working, then this seminar is not to be missed.


    Three days only,,,September 22 – 24, 2016
    Register now to reserve your seat..

    Coaldale, Colorado » CNC Seminars

    Only 20 seats will be made available so we can personally attend to your specific needs and questions.

    We can always be contacted by email.
    [email protected]
    Hope to see you there.
    Attached Thumbnails Attached Thumbnails Next-Stop-Colorado-2.jpg  
    Gary Campbell CNC Technology & Training
    GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos

  2. #2
    Join Date
    Mar 2008
    Posts
    1762

    Re: Coaldale, CO WINCNC Controller and Vectric Seminar

    There have been a number of inquiries regarding the WinCNC Training. All sessions use the OEM WinCNC provided screenset as an example. (See attached) It does not matter which screenset you use, OEM branded or custom, they all use the features within WinCNC Control.

    The screens may be a different color, the buttons may have different names and the macros you use could have slight nuances provided by the OEMs, but for the most part there is little difference under the hood.

    Bring your problems or projects, I am sure that we will get you going in the right direction
    Gary Campbell CNC Technology & Training
    GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos

  3. #3
    Join Date
    Mar 2008
    Posts
    1762

    Re: Coaldale, CO WINCNC Controller and Vectric Seminar

    A couple more updates to inquiries. Plasma is not on the menu for this WinCNC session. We are in the planning stages of one in the mid-Atlantic states where we will have a plasma guru in attendance.

    Rotary is not officially on the menu, but is always brought up.

    There is not a specific class set for building custom screensets..... but the 3rd day is user driven.
    Gary Campbell CNC Technology & Training
    GCnC411 (at) gmail.com www.youtube.com/user/Islaww1/videos

Similar Threads

  1. MasterCAM Post - CNT Router w/ WinCNC Controller Help!!
    By m_marenghi in forum Post Processors for MC
    Replies: 3
    Last Post: 06-08-2009, 07:57 PM
  2. Replies: 7
    Last Post: 01-12-2009, 06:35 AM
  3. Post for WinCNC Controller 2.1
    By tgramel in forum WinCnc
    Replies: 2
    Last Post: 03-31-2008, 11:56 PM
  4. BobCad with WinCNC controller 2.1
    By Scott V in forum BobCad-Cam
    Replies: 9
    Last Post: 01-17-2006, 08:23 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •