584,850 active members*
4,416 visitors online*
Register for free
Login
Results 1 to 2 of 2
  1. #1
    Join Date
    Jul 2016
    Posts
    16

    099 TOOL NOT FOUND IN TABLE

    Hi All,

    I have another problem that I can not figure. I am counter sinking three very small screws into a piece of stainless steel. Made a very simple program (see below) but when I go to "Run" the program it give me the error "099 TOOL NOT FOUND IN TABLE" (see below) But you can clearly see in the program that I have T1 selected. I have tried many things. Deleting the program and starting fresh, re-naming, editing other programs. The strange thing is that I was running this program when I burnt up a tool, changed a toll and re zeroed pressed run and now this. The old programs but not new ones. I hope someone can help on this strange one.
    By the way the new screen was super easy to install and worked perfect. These are also pics of the LCD.

  2. #2
    Join Date
    Jan 2009
    Posts
    52

    Re: 099 TOOL NOT FOUND IN TABLE

    Not to be too obvious but did you check your tool table to see that you have a T1 in it. Not sure what type of machine you have this on but the Q table is used to hold tool numbers.

Similar Threads

  1. Found way to sort/edit Tool Library with Excel
    By drutort in forum SprutCAM
    Replies: 9
    Last Post: 03-22-2018, 03:49 PM
  2. Replies: 4
    Last Post: 04-12-2014, 01:37 AM
  3. found xy table... want to make into wood router
    By randomeyes in forum DIY CNC Router Table Machines
    Replies: 6
    Last Post: 06-22-2010, 11:24 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •