[CNCMAN172]

Simple Dog Bowl Stand

Attachment 328814

[CNCMAN172]

Custom replacement knobs for a 1820 dresser. I could not find a picture of the finished dresser, my sister had me do this little job and sold the dresser in her antique store two days later. This required machining both sides of the board, you can see the holes for the tooling pins in the middle of the board for flipping it and getting it all aligned, worked pretty good.



Attachment 328816
Attachment 328818
Attachment 328820

[fretman_2]

Stunning work Louie!! Have you built any classical guitars?

I'm working on 5 acoustic guitars right now... here are some in-progress pics:

[fretman_2]

Fantastic!

A custom designed & manufactured electric RC helicopter designed to carry an HD video camera with full autopilot navigation system. All aluminum parts machined on home build cnc machine. Stays in the air 15 minutes which huge batteries on both sides of helicopter.

[robe_uk]

The last thing I made was a box, I wanted to try using inventables Easel software, I used the box making app. The default for the toolpath was on the line which caused the gaps that the joints. Cut out question marks which are stuck on to give a Mario mystery box theme for storing WII controllers etc. Size is 25cm cube

[louieatienza]

Stunning work Louie!! Have you built any classical guitars?

Thanks fretman and devastator!

I had built three nylon string guitars, the first (which was my first guitar) an archtop round-hole, and two thinline crossovers - one Les Paul shaped archec top, and another Tele-shaped... long before I started cutting parts with my CNC.
Attachment 328854
Attachment 328856
Can't find the Tele style pic....

[fretman_2]

All are beautiful. I just recently fell back in-love with playing my classical guitar. It's all I use now when I do an acoustic gig. I guess Willie Nelson knew something all along! BTW...what scale length are you using on the classics?

Thanks fretman and devastator!

I had built three nylon string guitars, the first (which was my first guitar) an archtop round-hole, and two thinline crossovers - one Les Paul shaped archec top, and another Tele-shaped... long before I started cutting parts with my CNC.


Can't find the Tele style pic....

[stevehuckss396]

I've searched through the forum a little bit and have found various posts of what people have made but I want to see more! Getting bored with the machine and looking for simple and fun things to make. I've always been interested in things that can be cut all in one shot and basically assembled after machining. What do you guys make with your machines at home and do you make any money doing it?

\


Scale engines that runs on gasoline.








People ask me all the time "what do they do, are you going to put it in something?" Well im working on it.

[CNCMAN172]

Steve,

Those are amazing, very nice work.

Russ

[fretman_2]

Amazing engines stevehuckss396...beautiful too!