[Andriy77]

Spindle is starting during G83 cycle with live tool and C-axis engaged. C-axis and spindle are try to work at the same time

[Andriy77]

It's HAAS TL-25

[ERUS]

Radial or axial live tool?

G83 Peck drill should work as normal for a Axial tool
If its a radial or side tool then you have to use G243.

Did you engage the C-axis with M154?


Here is a working code for using a Axial tool with a G83 peck canned cycle.

%
O00000
G20
(TOOL - 7 OFFSET - 7)
( 1 INCH DRILL)
(C-AXIS FACE DRILL)
G00 T0707
G17
M154
M8
G00 G54 X0. Z.25
C0.
G97 P250 M133
G98 G83 Z-1. R.1 Q.075 F4.0
G80
M9
G00 Z.25
G00 X8.
G00 Z8.
M135
M155
T0700
M30
%


Here is for a G243 Radial peck cycle.

%
O00000
G20
(TOOL - 9 OFFSET - 9)
( 1 INCH DRILL)
(C-AXIS CROSS DRILL)
G00 T0909
G19
M154
G00 G54 X4. Z-.8
C-90.
G97 P250 M133
G98 G243 X1. R3. Q.075 F4.
G80
G00 X8.
G00 Z8.
M135
M155
T0900
M30
%

[Andriy77]

Problem was in Parameter 315 bit 1 NO SPIND CAN CYCLE