507,916 active members
5,337 visitors online
Register for free
Login
Results 1 to 3 of 3
  1. #1
    Registered
    Join Date
    Jun 2011
    Posts
    28

    Mori Seiki ZL200 SMC Part Catcher Speed

    Hi all,

    I am having an issue with the part catcher moving way to fast when retracting back to home position. Anyone have any thoughts on how to slow the speed down? I could not seem to find any parameters that would affect the speed, only the positioning of the catcher itself.

    Thank you

  2. #2
    Gold Member
    Join Date
    Feb 2009
    Posts
    6026

    Re: Mori Seiki ZL200 SMC Part Catcher Speed

    I would assume this is the servo parts catcher? You would need to change the rapid parameter in the pmm (power motion manager) for that axis.

    Sent from my A3-A20FHD using Tapatalk

  3. #3
    Registered
    Join Date
    Jun 2011
    Posts
    28

    Re: Mori Seiki ZL200 SMC Part Catcher Speed

    PMM Parameter #40
    Worked pretty well. Now only about 10% of the parts fall into the chip conveyor (Large part so none are lost).
    5 inch part sometimes just gets thrown when cutting off even at 300rpm.

Similar Threads

  1. Mori Seiki ZL 200 Part Catcher Speed
    By Mikey4865 in forum Mori Seiki lathes
    Replies: 1
    Last Post: 08-16-2016, 08:15 AM
  2. Mori Seiki SH-40 Pallet changing speed
    By Tafc7306 in forum Mori Seiki Mills
    Replies: 1
    Last Post: 07-05-2014, 10:39 PM
  3. Code for parts catcher on a Mori Seiki CL-20
    By Nevronplastics in forum Mori Seiki lathes
    Replies: 4
    Last Post: 11-05-2011, 06:52 PM
  4. Mori Seiki SL-250 Parts Catcher
    By sorcerror in forum Mori Seiki lathes
    Replies: 1
    Last Post: 10-09-2010, 09:36 PM
  5. I need a very “small part” part catcher
    By Vern Smith in forum Haas Lathes
    Replies: 21
    Last Post: 08-25-2010, 01:55 AM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •