https://www.google.com/maps/d/edit?mid=zXW7cWI64qtk.kF9Dsmxma9PQ&usp=sharing
Tell me who you are, where you are (generally, not specifically) and which macxhine(s) you have, and I will place your pin onto the map.
Green Pin - Go Torch CNC table
Blue Pin - PlasmaCam 4x4 CNC table
Red Pin - Samson 510 CNC table
Thread: Get Your Pin!
Results 1 to 3 of 3
-
11-21-2015, 10:45 PM #1
Member
- Join Date
- Nov 2010
- Posts
- 177
Get Your Pin!
-
08-20-2016, 10:28 PM #2
Registered
- Join Date
- Jul 2014
- Posts
- 7
Re: Get Your Pin!
Jay Gallagher, Cedar Hill, TX PlasmaCam 4x4 DHC2
-
08-23-2016, 03:09 AM #3
Member
- Join Date
- Nov 2010
- Posts
- 177
Re: Get Your Pin!
Done!
Reply With Quote
