584,879 active members*
5,329 visitors online*
Register for free
Login
IndustryArena Forum > CAM Software > BobCad-Cam > Tutorials > Part , slice or section a 3D part
Results 1 to 3 of 3
  1. #1
    Join Date
    Nov 2004
    Posts
    9

    Part , slice or section a 3D part

    Using bobcad v28 and cannot find a way to break apart a 3D object. I have a part that is too big to 3D print so I need to break it apart into 4 sections. There must be a way to do this. If not, I could draw the part into 4 sections but I then cannot figure out how to bevel only the outside edge of a circle.

    I used the extrude boss and draft angle to build the complete circle but I cannot bevel the outside edge when it is in quarters?

    Anybody that can point me in the right direction?

    Joe L.

  2. #2
    Join Date
    Nov 2004
    Posts
    9

    Re: Part , slice or section a 3D part

    I got it! I finally found out how to work the solids-split commands and got exactly what I was looking for. Might not be the best way but it is good for now. Still cannot bevel one edge and extrude at the same time.

    Good for now.

    Joe L.

  3. #3
    Join Date
    Apr 2009
    Posts
    3376

    Re: Part , slice or section a 3D part

    A .bbcd file and we can probably figure it out

    You have to .zip it to upload it

Similar Threads

  1. Replies: 2
    Last Post: 02-28-2016, 10:07 AM
  2. Replies: 1
    Last Post: 05-17-2015, 08:37 PM
  3. cant get rid of solidcam from a part created internally within the solidworks part
    By Nava in forum SolidCAM for SolidWorks and SolidCAM for Inventor
    Replies: 3
    Last Post: 11-24-2013, 01:05 AM
  4. Replies: 11
    Last Post: 05-23-2007, 02:41 AM
  5. How to Slice a part into several Sections?
    By GisMo in forum Solidworks
    Replies: 5
    Last Post: 09-11-2006, 05:37 PM

Tags for this Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •