Does anyone have one that will work? The machine uses Vectric
Results 1 to 4 of 4
-
08-09-2016, 07:53 PM #1
Registered
- Join Date
- Mar 2012
- Posts
- 11
Post Processor, Bobcad v24 for a ShopBotd2418
-
08-09-2016, 07:56 PM #2
Registered
- Join Date
- Aug 2016
- Posts
- 15
Re: Post Processor, Bobcad v24 for a ShopBotd2418
I Am using V28 and i think the bobcad is a big joke can't seem to get the posts to work with the Avenger either. Im planning to switch over to Inventor HSM.
Originally Posted by jcspresser
-
08-09-2016, 08:00 PM #3
Registered
- Join Date
- Mar 2012
- Posts
- 11
Re: Post Processor, Bobcad v24 for a ShopBotd2418
I was using Bobcadv24 to operate a Microkentics machine. Bobcad had 2 processors for it, and neither worked. I had to subscribe to their tech support ($250) and spend a couple of hours on the phone tweaking their post processor
in order to get it to work. Kind of makes you wonder if that isn't their goal.
-
08-09-2016, 08:05 PM #4
Registered
- Join Date
- Aug 2016
- Posts
- 15
Re: Post Processor, Bobcad v24 for a ShopBotd2418
Im having the same problems with Bobcad.
Reply With QuoteSimilar Threads
-
BobCAD Post Processor
By Poseidon in forum BobCad-CamReplies: 11Last Post: 05-03-2015, 06:30 AM -
BobCad Post Processor
By 1QWK96GT in forum BobCad-CamReplies: 3Last Post: 03-24-2011, 09:48 PM -
with bobcad v23 post processor
By cncpilot in forum FadalReplies: 2Last Post: 05-20-2010, 11:24 PM -
Bobcad as a post-processor?
By parkerbender in forum BobCad-CamReplies: 7Last Post: 03-27-2010, 10:47 AM -
BobCAD-CAM v17 post processor help
By johnmac in forum BobCad-CamReplies: 8Last Post: 10-10-2007, 09:29 PM
Tags for this Thread
Posting Permissions
