[KSky]

Not a big deal, but I am not sure if there is some reason for it that I am missing.

It doesn't happen on the first tool change, but the Fusion 360 post for the Tormach puts a M1 before each tool change. It's redundant as the tool change already pauses.

(2D CONTOUR1)
M9
M1
M998
T167 G43 H167 M6


Any reason not to get rid of it and how?

[daniellyall]

there is a setting in the pre post dialog that turns it off and on

[KSky]

there is a setting in the pre post dialog that turns it off and on

Can you post a screen shot of where it is?

[sharmstr]

Attachment 330970

There's other goodies in there too.

[KSky]

That's perfect. I changed it in the post processor and life is good again.

Thanks