[radboi22]

Product number says HY02d22b3, but the manual for this item does not match.
Bought this VFD and spindle kit from EBAY,
Im trying to find a manual on this VFD, the seller gives me no information.
The settings Are Pn001 and up and I noticed all the other huanyangs are PD001.
There may be a manual floating around here for this type of VFD, and help would be REALLY APPRECIATED.
Thank you for your time!

[mactec54]

Product number says HY02d22b3, but the manual for this item does not match.
Bought this VFD and spindle kit from EBAY,
Im trying to find a manual on this VFD, the seller gives me no information.
The settings Are Pn001 and up and I noticed all the other huanyangs are PD001.
There may be a manual floating around here for this type of VFD, and help would be REALLY APPRECIATED.
Thank you for your time!

Was this the number from Ebay HY02d22b3 ?? if it was then they sent you a different VFD

Parameters do not match the Huanyang, because it is not a Huanyang, it is made by AskPower, they look the same, but quite different, I will look to see what Parameters you have to set

[radboi22]

You are right, if there's anyway you can get those parameters, you would be saving me hours of time !!

[radboi22]

Bro, I looked up ASKPOWER VFD manual, and i got it! Thanks man your amazing, how do I send you money?

[mactec54]

Bro, I looked up ASKPOWER VFD manual, and i got it! Thanks man your amazing, how do I send you money?

Here are the Parameters you need to set to get Running from the VFD Key Pad

Mactec54
AskPower Parameter Settings For 400Hz Spindle

Pn01=2

Pn02=400

Pn03=2 ( VFD Button Control Only )

Pn04=1 ( VFD Button Control Only )

Pn05=1

Pn08=15 ( This is adjustable Acceleration )

Pn09=15 ( This is adjustable Deceleration )

Pn010=400

Pn011=100 ( If water Cooled Spindle)

Pn012=400

[cncjack01]

Attachment 341422