I'm trying to drill a hole into D2 tool steel. I'm using a .0375in. diameter brass electrode. I'm going .100in deep. I'm using water as my dialectric fluid. Does anybody have any suggested settings for this burn?
Results 1 to 1 of 1
-
08-22-2016, 03:42 PM #1
Registered
- Join Date
- Aug 2016
- Posts
- 1
Condition Settings for brass diameter electrode
Reply With QuoteSimilar Threads
-
Engraving Settings for a Victory Original Series Brass Plaque
By eaglestone in forum Laser Engraving / Cutting Machine General TopicsReplies: 4Last Post: 08-21-2015, 11:27 PM -
360 Brass rings, 1.5" diameter
By Erik D_lux in forum North America RFQ'sReplies: 4Last Post: 01-17-2014, 03:30 PM -
Finding the centre of thin brass rod (drilling holes in 0.093" brass rod)
By Nitrous in forum MetalWork DiscussionReplies: 10Last Post: 01-16-2013, 06:52 AM -
3/8" Outer Diameter Hollow Brass Cylinder
By akira7799 in forum RFQ (Request for Quote)Replies: 7Last Post: 03-29-2011, 01:32 AM -
turning .003 diameter brass wire
By camtd in forum CNC Swiss Screw MachinesReplies: 3Last Post: 06-14-2008, 06:15 PM
Tags for this Thread
Posting Permissions
