[vmax549]

There are some interesting things coming in UCcnc concerning probing (G31) There is soon to be Trip point values that you can use to gather data . There is also soon to be 2 probe inputs and each one can be set up active low or active high to suite your probe type. They will both use teh same g31 routine an it looks at BOTH inputs now.

SO that mean s it is easy to have a Touchprobe (active high) and a tool probe ( active low) on the same machine at the same time.

ALSO interesting news is there soon may be a new UCCNC/CNCdrives website Forum for UCcnc users to gather at, share resources, report glitches and such.

(;-) TP

[Greolt]

ALSO interesting news is there soon may be a new UCCNC/CNCdrives website Forum for UCcnc users to gather at, share resources, report glitches and such.

That is good news. I feel this is an essential thing for UCCNC to become a major player.