584,849 active members*
4,227 visitors online*
Register for free
Login
IndustryArena Forum > MetalWorking Machines > Fadal > how to enter service parameters?
Results 1 to 2 of 2
  1. #1
    Join Date
    Feb 2007
    Posts
    1

    how to enter service parameters?

    this morning I lost parameters and all offsets on my 4020. I remember this hapening oncen before. I put all parameters in by "setp" and the tool changer position says tool #.654347 in the spindle. I remember fadal service having me to go into the service parameters and changing something. I don't remember what to enter into command mode.any help?

  2. #2
    Join Date
    Mar 2003
    Posts
    900
    Since your display is showing a bogus number and your parameters have been currupted, you need to do a Zero Memory Procedure. If you need the procedure sent to you, call Fadal Service and it casn be faxed or e-mailed to you.

    Neal

Similar Threads

  1. re-enter m-functions?
    By XXF in forum CNC (Mill / Lathe) Control Software (NC)
    Replies: 2
    Last Post: 08-08-2006, 04:15 PM
  2. Replies: 7
    Last Post: 04-29-2006, 03:30 AM
  3. can any one help plz enter
    By ahmed in forum Stepper Motors / Drives
    Replies: 4
    Last Post: 02-13-2005, 03:57 AM
  4. How do I enter comments into a Fanuc OiM?
    By Darc in forum Bridgeport / Hardinge Mills
    Replies: 4
    Last Post: 02-09-2005, 02:42 PM
  5. Replies: 4
    Last Post: 10-25-2004, 03:22 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •